|
Product Details:
|
| Use: | Roof,furring Channel Roll Foming Machine,door Frame,cable Tray Machine,Vineyard Grape Stake | Voltage: | 380V 50Hz 3phases |
|---|---|---|---|
| Condition: | New | Dimension(l*w*h): | 6500*1300*1100 |
| After-sales Service Provided: | Engineers Available To Service Machinery Overseas | Weight: | 2T |
| Power(w): | 5.5 KW | Control System: | PLC |
| Roller Material: | Coated With Chrome,45# Steel,45#steel,Cr12,High Grade #45 Steel With Hard Chromed | Warranty: | 1 Year |
| Product Name: | Roll Forming Machine Prices | Color: | Client's Request |
| Shaft Material: | High Grade 45# Steel | Usage: | Roof Profile,Construction,roof Tile Panel |
| Raw Material: | PPGI,PPGI/Galvanized Sheet | Cutting Blade Material: | Cr 12,Cr12Mov With Quench HRC58-62° |
| Thickness: | 1.2-2mm | Life Time: | 10 YEARS |
| High Light: | 2mm Tile Roll Forming Machine,Gutter PPGI Roll Forming Machine,PPGI roofing sheet machine |
||
Glazed Tile Roll Forming Machine Door Frame Roll Forming Machine Gutter Roll Forming
(1). Brief Introduction
This aluminium profile roll forming machine. It can form the steel sheet according to customer’s requirement continuously, automatically cut to length. The equipment adopts PLC control, AC frequency and adjusting the speed technology, and it realize the continuous automatically production, therefore, it is really a new type of energy-saving and high-effective producing equipment for steel roof or wall panel. And it has many advantages, just like high forming speed, low noise, stable transmission, easy operation, good appearance and so on.
| Suitable material | PPGI/Aluminium sheet/galvanized sheet/various sheet plates |
| Thickness of coil sheet | 0.2-0.6mm |
| Usage | Light steel keel |
| Effective width | 75mm |
| Material of main frame | 600H steel |
| Diameter of Soild shaft | 70mm, high grade 45# steel |
| Roller |
High grade 45# steel, quenched and tempered treatment, hard chrome plated 0.05-0.07mm |
| Thickness of middle plate | 16mm, 45# steel plate |
| Forming station | 14rows |
| Drive type | By chain(1.0 inch), link bearing model 6210 |
| Power of main motor | 5.5 kw, Lichao, Shanghai, with reducer |
| Sidewall connection bar | 25mm, zinc plated |
| Forming speed | About 12-18m/min |
| Hydraulic pump station | 4.0 kw, 40# hydraulic oil |
| PLC | DELTA(TAIWAN)/Mitsubishi |
| Material of razor blades | Cr 12, quenching 58-62℃ |
| Switch | CHNT |
| Frequency changer |
SAJ |
(3).Technical Detail
A Sheet Specifications
| 1 | Coil Type | PPGI GI |
| 2 | Width | 500mm |
| 3 | Thickness | 0.3-0.8mm |
| 4 | Yield stress | Q235 |
| 5 | Effective | 235mm |
B Components Details
| Roller Material | High grade 45# steel. Hard chrome plating, 0.05mm. |
| Main Frame | 350# steel. More stable and no shaking. |
| Middle Plate |
16mm. We use thicker plates to ensure stability of our products. |
| Forming Steps | 15, according to the drawing. |
| Shaft Material | Φ70 mm, high grade 45# steel. |
|
Treating process: tempering- finish turning, high rigidity, hard to deform. |
|
|
Cutting Blade Material |
Cr12, hardness HRC60-62. |
| Treating process: heat treatment- plane abrasion- wire electrode cutting. |
C. Electric Components
| Suitable Power | 380V, 50 Hz, 3 phase or according to your need. |
| Screen | 7 inch touch screen, easy to operate. |
| PLC | Delta DVP 14ES |
|
well-adapted to various conditions, such as moisture, electromagnetic disturbance. |
|
| Frequency Converter |
Delta VFD-M. It has the advantage of slowing down before cutting, to ensure the length accuracy (±1mm, far better than industrial standard ±3mm). |
|
Length Measurement Device |
Omron, made in Japan. |
| It features with high accuracy and stability. |
Contact Person: admin
Tel: +8618994464917
